Upcycled Tutorial - Wine Cork Dog Leash (yes, I am totally serious) Recycled Holiday Gift Countdown - Week ll


If there is a special pooch in your life and you have collected a few wine corks for yourself

(and if you haven't maybe you should get working on that one)

you can easily make an adorable leash that special pooch will be proud to walk the neighborhood with!

Now, I should add that this is probably not a good leash for your rottie or any pup that needs more than a small amount of control

(although this is surprisingly strong and I cannot pull it apart - your rottie is probably stronger than I am though)


Someone incredibly wonderful sent me these corks not realizing they were not made from actual cork, but I knew I would eventually find a great use for them (these are synthetic corks, but your wood corks will work equally well).

You will need:

some corks
slip rings
eyehook and washers
spring hook
key fob for the hand grip
(these were puchased on Etsy from loveyduds)
super glue



Easy peasy instructions - Make a starter hole in the center of the cork with your eyehook, remove hook, add a couple drops of super glue to the hole, screw in eyehook and a small washer, add slipring, repeat, add a fabric key fob handle to one end and a latch hook to the other which will attach to your pup's collar.

Just be prepared to deal with a big-headed pooch from all the attention she/he will receive - Olive has become impossible to live with and is even demanding breakfast in bed ...

There are also lots of amazing doggie goodies on Etsy for your holiday shopping like these amazing finds here:


1. leashes from hollywoofstyles
2. leather dog collar from thecoolpuppy
3. mosaic dog leash holder by Raquel Stanack
4. Molly collar and leash from murphyandgert
5. turquoise dog collar by ChloesCollars
6. love to fart dog tag by hugapug studios
7. striped dog sweater by beantownhandmade

Maybe You Can HAVE It All, But You Can't DO It All - Work Smarter, Not Harder Part II - why the right tools matter

I bet you thought I had forgotten all about my Work Smarter, Not Harder series, didn't you?

(tell the truth, we're all friends here and I don't blame you because I have been known to leave these series posts hanging out forever for a long time)

When I sat down to write Part II which I had so smartly labeled "Tools" and "Delegation" I realized I had absolutely no idea where I was going with these topics and am certainly no kind of expert on either.

(not that this has ever stopped me before)

So, I will be just dive into tools right now and save delegation for next week when we will chat about all things delegatable.

(and if you have anyone in your life besides you, you totally have someone to delegate to, and if they actually live with you, well, then they totally have to do what you tell them to do and there are lots of ways to make this happen that don't involve the use of any weaponry on your part - really)

TOOLS OF THE TRADE

OK, the first thing I want to say about tools because I do not know your specific little enterprise is that being a maker, you should make yourself aware of what tools are out there for you.

For a long time (until last month)

I used a hand drill for all kinds of things when a drill press would have worked so much better.

Now, hubby has a huge drill press in his shop and I use that one for my lockets, but everything else, and I make alot of little everything else's, I drilled in my own studio with a hand drill.

When I finally broke down and bought a smaller drill press for my studio

(about the cost of a dinner out- why I waited so long I have no idea - other than I thought it would be too messy in the studio and I have no space - but once I got serious and created some space and figured out I could just set the damn thing in a cardboard box lid to make sawdust cleanup easier I bought one)

I saved time.

When I spent half a day making jigs and templates for everything I drill consistently in the same place I saved alot of time.


I think partly because hubby is such a big proponent of having the proper

(and most expensive - ugh, yes, our retirement plan is entirely pieced together with Snap On hand tools and large machinery that need to be continually "updated")

tools and because I am such a pro-recycler and re-purposer, I have always leaned toward the "make do" aspect of tool purchasing.

The truth is though that if you are a professional person running a professional business you need the right tools - the best you can afford - don't raid the kids' college funds now, but wire wrapping your beads with the wrong needle nose pliers is not the way to go.

The other tools I recently purchased are a headset for my studio phone - no more running to the phone, I have the headset around my neck and the phone itself clipped to my pocket, and an answering machine that announces the name of the caller out loud (so I know who to ignore answer). Both are great time savers.

(I may be the only person left with a landline, but there could be some way you can use tools to avoid distractions, too)

If you have an Etsy shop there are tons of time-saving downloads out there and I will post about them next time.

(I really promise to do this - pinky swear and all that jazz)

In the meantime maybe start thinking about your own studio tools and check out what time saving new (or new to you) stuff might be out there.

**power drill tea towels by girlscantell and I do all my own stunts embroidery machine design by funkeedesigns**

GIVEAWAY - GoodKarma - Gorgeous Hand Dyed Hemp Oven Mitt! CLOSED


AND THE WINNER IS Penelope Stitch Shop!

True Random Number Generator (random.org)

Min: 1
Max: 231
Result:
211

Good Karma is the amazing eco-friendly shop of compulsive crafter Bren from Wisconsin!

Bren has been sewing for about 9 years (5 professionally). She loves recycling and vintage fabrics. She hand dyes with low-impact dyes and amazing colors.

Bren also loves dill pickles, Bob Marley, and manatees.

(I for one can totally see the dill pickle influence in her work!)

We are so lucky to have one of her amazing pieces for this week's giveaway!


WHAT YOU GET:

One lucky winner will receive this gorgeous handmade hemp and organic cotton oven mitt!




HOW TO WIN:

Visit Good Karma and check out her amazing work - then come back here and leave a comment letting Bren know which piece is your favorite!

For additional entries:

(5) Twitter this post
(5) Blog about this contest; linking to this post
(5) Follow my blog

Let me know if you have done these things so I can give you additional entries. This contest is open to everyone.

DRAWING:
Enter by midnight, Sunday, November 14th! CLOSED Good Luck!

Friday Finds - EcoEtsy Giveaway - Week 1 - You Wear It Well - don't miss this one!

Make sure to pop over to the EcoEtsy team blog and enter the first of several green holiday giveaways - it is easy to enter and one lucky winner will receive a handmade prize package worth $263.00! It is HERE

Upcycled Tutorial - T-Shirt Magnet Board - Recycled Holiday Gift Countdown

This week kicks off my 2nd annual holiday recycled handmade gift tutorial countdown to Christmas!

(say that two times fast, will ya)

A favorite easy peasy gift I like to make for people are magnetboards created from their favorite old t-shirts!

You can use any size frame for this - you can even make sets of framed magnetboards from the same t-shirt.

You will need:

1 t-shirt
1 piece of sheetmetal from the hardware/home improvement store- the thinner the better
1 frame
staple gun, scissors, marker, sheetmetal cutters (heavy duty scissors can be used, too)

1. mark sheetmetal using the paper template inside your frame
2. cut sheetmetal to size
3. cut t-shirt about 1" larger than template on each size
3. place the corrugated cardboard that came with your frame behind the sheetmetal and stretch the tshirt over top
4. staple the tshirt to the cardboard (the sheetmetal should be directly under the t-shirt)
5. slip it into your frame

You will just need to add some favorite magnets (and if you follow my blog and need up to 3 magnet lids - you will just have to glue a magnet to each - just email me through the contact link at right with your address and what you would like on them - here I have used some favorite Dylan lyrics - I will pop them in the mail to you for free).



More recycled tutorials here including last year's gift countdown!

And if you want to hold onto your own t's- it is hard for me to part with mine- you can find some amazing recycled t's for sale on Etsy:

1. recycled rug by talking squid
2. recycled flowers by marang97
3. recycled bracelet by AnnDoraCraft
4. recycled necklace by kewpiedolly
5. zjayne's amazing recycled wristlets

Grow Your Business With Collaborations or when one plus one equals more than two

From our earliest days in the sandbox we have always gotten more done

(think roads and bridges and tootsie roll toll-earning sand tunnels here)

and had more fun, when we did it together.

The problem is that most crafty, creative people I know (including myself) were not really "meet me in the sandbox" kind of kids, but more "sit in the corner and color" kind of kids and some of us have translated that need to work alone

(and yes, alone work is very productive at times)

into solo businesses that could really use a jolt of "something other than ourselves" from other creative professionals.

(yes, I will overuse parentheses and quotation marks in this post and cannot be stopped)

The right collaboration may be the match you need to get your fire started!

1. Look for equal partners and know what you are offering - unbalanced partnerships will probably not work out well for either person

(if you are looking for a blog collaboration, unless you are an incredibly amazing and prolific writer - and if you are, help, I need you - you might be better off approaching a blog with comparable blog readership numbers to your own to trade off posts)

2. Limit the scope of your collaboration in the beginning

(get your feet wet together to see how it feels, you can always extend your work together as you build trust and things work out)

3. Make agreements simple. Put things in writing. Establish clear protocals for changing, extending or unwinding things.

4. Be considerate and appreciative of each person's workload and keep communication lines open

(One of the amazing artists I work with on the Polarity locket always called me "her manufacturer" to the customers that bought her locket. It bothered me a little. Well ... it bothered me alot and when I finally talked to her about it- of course, she had no idea I was feeling the way I did since she could not read my mind- we worked it out and have continued to collaborate and remain friends)

5. Goodwill is essential and this means you want the other person to benefit from the collaboration as much as you do.

There are unlimited ways to do this - you could create a postcard with a small handful of other sellers and each could agree to send the postcard out with any orders, you can set up a blog advertising ring with other blogs where you place your ad on their blog and they place their ad on yours, you can collaborate on an actual product

(like the amazing piece shown here which is a collaboration between jewelry designer/maker 3squares and fabric designer Jan DiCintio of Daisy Janie)

you could make team treasuries where you promote each other, have feedback sessions where a handful of sellers offer advice and positive reinforcement to each other, do trunk shows with local sellers, etc.

There is something about combining our energies that allows that energy to grow in really huge and exciting ways - ways that you can't foresee when you start this adventure together.

Lots and lots of good can come from this collaboration thing. I find that the best things sometimes take the most energy - you likely get more out of trunk shows than post cards for example.

(and yes, bad things can happen, too - there are no guarantees of happy endings anytime we interact with other people, no matter how many contracts we sign and promises we make)

If a collaboration sounds right to you at some point you have to act to get the ball rolling. You may have to get a little scared. Maybe even a lot scared ... you just have to do it.

(feel the fear and do it anyway, good book btw)

The first artist I asked to do the locket series with me that I did not really know was Jessica Doyle. And if she had said 'no thanks' (the next person I asked said no thanks) who knows what would have happened. I might have stopped right there.

(I know that I shouldn't have, but I might have, I am rather wimpy that way at times, although I like to think I would just keep on keeping on like that little energizer bunny that I am in my head)

And I am glad I didn't - give up, that is. And I think you will be, too.

(trust me, I am a professional collaborator - hopefully the FBI is not reading my blog - and I know these things)



adventurer print by fifiduvie
necklace by 3squares